| Items | Specification |
| GNSS | Signal Tracking | 965 Channels |
| BDS:B1,B2,B3,B1C,B2A |
| GPS: L1,L2C,L2P,L5 |
| GLONASS: L1,L2 |
| Galileo: E1C,E5A,E5B |
| SBAS,QZSS: support |
| L-Band :support |
| GNSS Features | Positioning output rate 1Hz~20Hz |
| Initialization time : <10s |
| Initialization reliability : >99.99% |
| All-Constellation receiving Technology that supports all existing and planned GNSS constellation signals |
| Positioning Precision | Code Differential GNSS Positioning | Horizontal:0.25 m + 1 ppm RMS |
| Vertical:0.50 m + 1 ppm RMS |
| SBAS positioning accuracy: typically <5m 3DRMS |
| Static GNSS Surveying | Horizontal:±(2.5mm+0.5×10-6D) |
| Vertical:±(5mm+0.5×10-6D) |
| RTK Surveying | Horizontal:±(8mm+1×10-6D) |
| Vertical:±(15mm+1×10-6D) |
| Operating system / user interaction | Operating system | Linux |
| buttons | Single button operation, convenient and quick |
| indicator | Four indicator lights |
| Web interaction | Built-in WebUI management background, support WiFi and USB mode access WebUI page, real-time monitoring of receiver status, set
any configuration of the receiver. |
| voice | Intelligent voice technology, support for Chinese, English, Korean, Russian, Portuguese, Spanish, Turkish; support for voice
customization |
| Data cloud service | Support register online, remote upgrade and etc. |
| Electrical | Power | 9-28V wide voltage DC design with overvoltage protection |
| Battery | High capacity built-in battery 6800mAh 7.4V |
| Power solution | Routine operations meet the endurance of more than 8 hours
(Provide 7*24h continuous working power solution) |
| Communications | I/O Port | 5 PIN LEMO External power interface +RS232 |
| 7 PIN LEMO with USB(OTG) |
| Radio, Network Antenna Interface (shared) |
| Radio modem | Built-in high performance radio, |
| operating frequency 410-470MHz, |
| External radio: 5W/25W/35w |
| protocol: TrimTalk450S,TrimMark3, SOUTH, CHC,SATEL,HI-TARGET |
| Bluetooth | BLE Bluetooth 4.0;Bluetooth 2.1 + EDR standard |
| NFC wireless communication | Using NFC wireless communication technology, the controller can be automatically paired with the receiver. ( controller needs have
NFC wireless communication module) |
| WIFI | standard | 802.11b/g/n |
| WIFI hot spot | WIFI hot spot function: intelligent terminal can connect to the receiver to do personalization custom; |
| Data transmission supported between the receiver and the controller |
| WIFI data chaining | Receiver can access WIFI, to broadcast or receive differential data via WIFI |
| Data storage / transmission | Data storage | 8G solid state memory, supporting 32GB external extension, Automatic cyclic storage, |
| Supporting external USB memory for data storage; |
| transmission | One key Smart copy directly exports host static data via external USB memory; plug and play USB for data transfer; FTP download,
HTTP download. |
| data format | Static: SOUTH, Rinex2.01, Rinex3.02 and etc. |
| Differential data format: RTCM 2.1,RTCM 2.3,RTCM 3.0,RTCM 3.1,RTCM 3.2 Input and output; |
| GPS output data format: NMEA 0183, PJK plane coordinates, binary code, |
| IMU/Sensor | Electron bubble | Built-in sensors, data collector software can display electronic bubbles, real-time check the alignment of the surveying pole
leveling situation |
| Shake and shake tilt measurement (optional) | The built-in IMU sensor supports the tilt measurement function of shaking and shaking, and automatically corrects the coordinates
according to the tilt direction and angle of the centering rod. |
| temperature sensor | Built-in temperature sensor, real-time monitoring and adjusting host temperature |
| Physical | Size | 135*135*84.75mm |
| Weight | 0.97KG with battery |
| Material | aluminium magnesium alloy |
| Temperature | Operating:–30 °C to +65 °C |
| Storage:–40 °C to +80 °C |
| Humidity | Resistance to 95% condensation |
| Waterproof/ Dustproof | Waterproof:1m immersion,IP68 |
| Dustproof: Completely prevent dust from entering,IP68 |
| shockproof | Resistance to 2-meter drop with rod |
